This universal tap connector is designed to allow a tap without a screw fitting to connect to a hose. The universal tap connector is fastened onto the end of the tap, and then tightened using the jubilee clip attached to the hose connector. The hose connector should provide a water tight fixing which then allows you to connect a hose to your tap.
The female hose connector is the most commonly used hose connector and connects to the male fitting. Most tap and hose connections end with a male connector, the female connector then slots onto the male, leaving you with the correct connection for your hose to be connected to.
The male tape connector has a threaded base, so can screw onto the tap. It is used as a fitting to fix a hose to a tap. The male tap connector has two different sized threads, which makes this male tap connector compatible with most outdoor tap sizes.
This hose to hose connector is used to connect two pieces of hose. It is very easy to use, you simply feed one end of the hose through and then tighten the fitting. You do the same for the other piece of hose and then your hose will be connected.
This garden hose nozzle fits onto a female connection, and then allows you to control the water and your hose. The garden hose nozzle turns easily to stop the water flow, and then can easily be turned back to allow the water to flow from the hose.
This 3 way hose connector gives you the option of turning one hose into two. Simply attach the in flowing hose to the 3 way connector, then attach two more hoses onto the 3 way connector.
The male to male hose connector allows two pieces of hose to be connected together. For the hose to be connected together, you need a female connector on each end of the hose to fit into each male connector.
This indoor tap connector acts as a clamp onto your tap at home, and allows you to connect your garden hose to a tap. The top of the indoor tap connector unscrews to have enough room to fit the tap into the connector, then it is screws up and fastened. The hose is then connected onto the female end on the connector, and the hose connection is complete.
